Sunday, November 25, 2012

Unigraphics NX 7.5 Tutorials Motion Simulation - Rack and Pinion


Unigraphics NX 7.5 Tutorials Collection:
Learn to use the Rack and Pinion coupler in NX 7.5's Motion Simulation module!


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, November 24, 2012

Unigraphics NX 7.5 Tutorials - Concept Design (Car Seat)


 Unigraphics NX 7.5 Tutorials - Concept Design (Car Seat) Modeling car seat.
Commands Used - X form, Offset Curve in face, Soft Blend and etc...


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, November 23, 2012

Thursday, November 22, 2012

Unigraphics NX 7.5 Tutorial Modeling - Concept Design (Spoon)


Unigraphics NX 7.5 Tutorial modeling Concept Design spoon. Spoon are not easy to model because of the curve.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, November 21, 2012

Animation made with Unigraphics NX



Animation made with Unigraphics NX. Drill and attachments Concept. Made by Mike Burke @ Jamb Systems.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, September 23, 2012

Unigraphics NX 8 Tutorial -Introduction to the NX Advanced Simulation environment - Part 1/3



Unigraphic NX8 Tutorial-Advanced Simulation environment.
The movie covers some of the basics of the user interface and how to perform a simple linear static analysis using a paper clip as an example.

Recommended Unigraphics Items  




Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, September 21, 2012

Friday, July 13, 2012

Unigraphics NX Drafting training tutorial.




Tutorial for Siemens Unigraphics NX drafting for a simple component in Siemens PLM Unigraphics NX, taken from CAD CAM training session at cadcamgalaxy. The training is conducted in Mumbai India catering students from all over the world. The lecture was conducted on Unigraphics NX6, at the Authorised trainng center of Siemens PLM softwares.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, July 12, 2012

Technical Drawing -Drafting Tutorial, Free Download PDF

This Technical drawing or drafting manual covers:

•Multi-View Projection -The Glass Box
•Third Angle Projection
•Two View Drawings
•Line Types
•Section Views
•Auxiliary Views
•Detail Views
•Broken-Out Section Views
•Partial Views, Cropped Views
 and more....

Good for beginners, there is also self assessment after each chapter. 

Here is the download copy Technical Drawing -Drafting Tutorial, Free Download PDF
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, July 10, 2012

DRAFTING MANUAL - Dimensioning and Tolerance Rules -PDF Download

This Drafting Manual uses ASME Y14.5-2009 Dimensioning and Tolerance.
Good for learning Student and Engineer alike learning  drafting.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, July 9, 2012

Drafting Dimensioning Rules and Standard. Downlaod PPT

Good for student or new Engineer learning Drafting. 
Not all companies used the same drafting standard, the download is just a guide line to get you started.
Use the checklist to insure you have followed the basic dimensioning rules. Keep in ... This method is commonly used in architectural and structural drafting.
Here is the link to Free download Drafting Dimensioning Rules and Standard


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, June 10, 2012

Unigraphics NX 8 Tutorials - Tips -n Tricks - Full Screen Mode



Unigraphics NX 8 Tutorials -   Tips -n Tricks - Full Screen Mode
Full screen display maximizes the size of the graphics window, while still giving you easy access to menus, the Resource bar, and toolbars.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, June 8, 2012

Unigraphics NX 8 Tutorials - Femap Tips and Tricks: Element Selection by Adjacent Face



Unigraphics NX 8 Tutorials Femap
See how you can control selection of a group of elements that have adjacent faces in Femap.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, June 2, 2012

Unigraphics NX7.5 Tutorials - Solid Punch on a cylinder



 Unigraphics NX7.5 Tutorials - Solid Punch on a cylinder .
This technique Punch a cylinder on the same plane 90 degree.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, June 1, 2012

Unigraphics NX Tutorials -CAE Finite Element Analysis Workflow - Report- Part 6(Last)



Last Part.
Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #6: Generate Report


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, May 31, 2012

Unigraphics NX Tutorials - CAE Finite Element Analysis Workflow - Post Process -Part 5




Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #5: Post Processing
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, May 30, 2012

Unigraphics NX Tutorials - CAE Finite Element Analysis Workflow - Constrain Part-4



Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #4: Specify Constraints & Boundary Conditions
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, May 29, 2012

Unigraphics NX 7.5 Tutorials - Deformable Part



www.nxtutorials.com brings you an NX 7.5 modeling technique called "Deformable Part." This functionality is extremely useful when it is beneficial to represent the real world "flexibility" of a component. For this case study we are looking at a Medical Product known as a stent. Our goal is to represent the shape memory properties of the material Nitinol.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Unigraphics NX Tutorials CAE Finite Element Analysis Workflow - Mesh Part-3



Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #3: Meshing


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, May 28, 2012

Unigraphics NX 7.5 Tutorials -06.15.11 Progressive Modeling in NX 7.5



This is a webinar 23min video on Progressive Modeling in NX 7.5.
You can learn good NX skill here.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Unigraphics NX Tutorials CAE Finite Element Analysis Workflow - Idealize Part-2



Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #2: Geometry Idealization

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, May 27, 2012

Unigraphics NX Tutorials CAE Finite Element Analysis Workflow - Start Part-1



Workflow illustration for structural finite element analysis (FEA) on a bracket using Siemens NX CAE & Siemens NX Nastran - Part #1: Getting Started.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, May 26, 2012

Unigraphics NX 8 Tutorials - Constraint Navigator



The NX8 Constraint Navigator is a great and powerful tool that lets you control the assembly constraints that you have created for your assemblies. Within the constraint navigator all the constraints of an assembly are organized such that the user can much more easily understand the structure of the assembly. By right clicking on the top of the menu, a user can sort the information in the way that makes the most sense to them.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, May 24, 2012

Unigraphics NX8 Tutorials - Pattern Spreadheet



In this tutorial we show you how you can use a spreadsheet to modify a pattern to change individual instances.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, May 23, 2012

Unigraphics NX 8 Tutorials - Sheet Metal Enclosure



Unigraphics NX 8 Tutorials - Sheet Metal Enclosure
Quick and easy way to design a sheet metal enclosure.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, May 21, 2012

Unigraphics NX 7.5 Tutorials -Create Pram Assembly Sheet Metal



Unigraphics NX 7.5 Tutorials -Create Pram Boat Assembly Sheet Metal
Shows how to quickly create a pram boat using sheet metal features.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, May 19, 2012

Unigraphics NX8 Tutorials - Radial Patterns



http://www.NXTutorials.com presents: NX8 now has the ability to easily create radially patterned features. An engineer can quickly define a radial pitch distance and a count and NX8 will produce concentric rings of patterned features. It's easy and it's really powerful. The new "Pattern Feature" command has many other new abilities too.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, May 17, 2012

Unigraphics NX8 Tutorials - Stagger Pattern



http://www.NXTutorials.com presents: The new NX8 Pattern Feature command is more powerful than ever before. It gives users the ability to create radial patterns of holes and or other features that are staggered. In this short video you will learn how to use the comma nd and some of the other options that make this command extremely useful.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, May 16, 2012

Unigraphics NX8 Tutorials - Iso-Paramentric Curve



http://www.NXTutorials.com presents: NX8 now has iso parametric curves that update and are well, parametric. In this exercise you will learn where to find the new isoparametic curve command and you will see one neat application of it.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, May 12, 2012

Unigraphics NX 8 Overview (already out??)



Unigraphics NX 8 Overview  (already out??)
Nice Debut  of NX 8.

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, May 11, 2012

Saturday, May 5, 2012

Thursday, May 3, 2012

Unigraphics NX 7 Tutorials - Tips - Create a cutout using Swept



Unigraphics NX 7 Tutorials - Tips - Create a cutout using Swept 
Create a cutout and then a circular array of these cutouts using Siemens NX


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, April 30, 2012

Unigraphics NX 7.51 Tutorials Roller chain modelling - Part 2



Unigraphics NX 7.51 Tutorials Roller chain modelling  - Part 2
The final part for modeling roller chain.

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, April 29, 2012

Unigraphics NX 7.51 Tutorials Roller chain modelling - Part 1








Unigraphics NX 7.51 Tutorials Roller chain modelling  - Part 1 
Don't see this kind of tutorial. Roller chain can be model for any products that uses chain like 
bicycle, motorcycle and many other application.

Stay tune for part 2.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, April 19, 2012

Unigraphics NX 7.5 Tutorials - Modeling - Fit Spline, Create a Helmet.



Unigraphics NX 7.5 Tutorials - Modeling - Fit Spline.
Learn to create a Fit Spline on 3D point cloud data of a helmet.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, April 18, 2012

Tuesday, April 17, 2012

NX Unigraphics 7.5 Tutorial - Modeling - Offset in Face



NX Unigraphics 7.5 Tutorial -  Modeling - Offset in Face
learn to Offset a curve on a face.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, April 16, 2012

NX Unigraphics 7.5 Tutorial - Modeling - Studio Spline



NX Unigraphics 7.5 Tutorial -  Modeling - Studio Spline
Learn to create a Studio spline on 3D points and simultaneously bridging it in a continuity with Comb assistance.


Daljeet singh
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, April 13, 2012

Unigraphics NX 7.5 Tutorials - Creating a Sketch Pattern



 Unigraphics NX 7.5 Tutorials : Using Sketch Pattern
This video show the creation of a complex feature based on a two dimensional array.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, April 12, 2012

Unigraphics NX 7.5 Tutorials Lesson 4 of 4, Free Download PDF

Download Lesson 4 Unigraphics Tutorials NX 7.5 --> Lesson 4 pdf

Check out Unigraphics Related Products


 The lesson 4 content:- 

NX 7.5 ............................. 1
Lesson 4 - Assemblies ....... 1
Pre-reqs/Technical Skills ..... 1
Expectations .................... 1
Objectives/Measurables ..... 1
Lecture Topics .................. 1
Introduction – NX ............. 1
Assemblies ...................... 1
Creating an Assembly ....... 2
Changing Constraints ....... 15
Moving Components ......... 22
Assignment ..................... 25


Hope you enjoy all the 4 lesson.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, April 11, 2012

Unigraphics NX 7.5 Tutorials Lesson 3 of 4, Free Download PDF

Download Lesson 3 Unigraphics Tutorials NX 7.5 Link --> Lesson 3 pdf

Check out Unigraphics Related Products


The lesson 3 content:- 

NX 7.5 ............................... 1
Lesson 3 – More Features .... 1
Pre-reqs/Technical Skills ....... 1
Expectations ...................... 1
Objectives/Measurables ....... 1
Lecture Topics .................... 1
Introduction – NX ............... 1
Expressions ....................... 2
Datum Planes ..................... 5
Instance Features (Arrays) .. 10
Sweep ............................... 14
Assignment ........................ 21

Look out for the next lesson.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, April 10, 2012

Unigraphics NX 7.5 Tutorials Lesson 2 of 4, Free Download PDF

Download Lesson 2 Unigraphics Tutorials NX 7.5 Link --> LESSON 2 PDF
The lesson 2 content:-  
NX 7.5 ............................... 1
Lesson 2 – Drawing a Part .... 1
Pre-reqs/Technical Skills ....... 1
Expectations ...................... 1
Objectives/Measurables .......1
Lecture Topics .................. 1.
Introduction – NX ............. 1
Drawing a Part .................. 2
Initial Sketch .................... 2
Revolving the Base ............ 5
Sketching on a Surface ...... 7
Placing the Holes ............... 10
Adding the Edge Blend ...... 13
Adding the Grooves ......... 14
Making the Part Hollow ...... 16
The Part Navigator ........... 17
Assignment .................... 19

Watch out for Lesson 3
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, April 9, 2012

Unigraphics NX 7.5 Tutorials Lesson 1 of 4, Free Download PDF

Download Lesson 1 Unigraphics Tutorials NX 7.5 --> Lesson 1 pdf 

Check out Unigraphics Related Products

The lesson 1 content:- 
NX 7.5 ................................ 1
Lesson 1 – Getting Started ... 1
Pre-reqs/Technical Skills ........ 1
Expectations ....................... 1
Objectives/Measurables ........ 1
Lecture Topics ..................... 1
Introduction – NX ............. .. 1
Opening NX .........................2
Starting a New Model ............2
Drawing in NX ................. ... 4
Trimming and Deleting........ . 8
Editing Dimensions ............. 9
Extruding and Revolving ..... 9
Adding Features ................ 12
Chamfer ......................... . 13
Edge Blend (Fillet) ......... ... 13
Assignment .................. ... 14

More lesson coming...
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, April 8, 2012

Unigraphics NX 7.5 System Requirements and Information

Before installing Unigraphics NX 7.5, understand your computer or work station computer. ( Better Performance and Faster.)configuration.

NX 7.5 System Requirements and Information


Operating System Requirements and Information

  • Windows XP Professional operating system with Service Pack 3 or above (32-bit or 64-bit)
  • Windows Vista Business or Vista Enterprise operating system (32-bit or 64-bit)
  • Windows 7 Enterprise, Ultimate and Professional (32-bit or 64-bit)
  • Internet Explorer 6 or 8.

Hardware System Requirements


  • Recommended system configuration
    • 32-bit (x86) or 64-bit (x64) processor
    • Windows 7 operating system for optimal performance and user experience
    • At least 2 GB RAM (More RAM faster and better performance)
    • True Color (32-bit) or 16 million colors (24-bit)
    • Screen Resolution: 1280 x 1024 or higher, wide-screen format ( min 17" and above)
    • 5 GB disk space required for installation

Display System Requirements and Information


For information about cards used in testing Solid Edge and results, refer to http://support.ugs.com/online_library/certification/.

A 1GB dedicated graphic card or higher is recommended when working with large assemblies or complex parts.

Written by Jytra Administrator  
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, April 7, 2012

UP DATED Tips and TRICKS Unigraphics NX Shortcut keys or Hots keys.

Here a more "complete" updated Unigraphics NX Shortcut keys or Hot keys. Make you job easier when working on modeling  or drafting.


Edit-Undo List-Invalid menu entry             Ctrl+Z               UG_EDIT_UNDO                            
Edit-Cut                                      Ctrl+X               UG_EDIT_CUT                             
Edit-Copy                                      Ctrl+C               UG_EDIT_COPY                            
Edit-Paste                                    Ctrl+V               UG_EDIT_PASTE                           
Edit-Delete...                                Ctrl+D                UG_EDIT_DELETE                          
Edit-Selection-Top Selection Priority - Feature F UG_SEL_FEATURE_PRIORITY          
Edit-Selection-Top Selection Priority - Face  G UG_SEL_FACE_PRIORITY                    
Edit-Selection-Top Selection Priority - Body  B UG_SEL_BODY_PRIORITY                    
Edit-Selection-Top Selection Priority - Edge  E UG_SEL_EDGE_PRIORITY                     
Edit-Selection-Top Selection Priority - Component C UG_SEL_COMPONENT_PRIORITY
Edit-Selection-Select All                     Ctrl+A               UG_SEL_SELECT_ALL                       
Edit-Blank-Blank...                            Ctrl+B               UG_EDIT_BLANK_SELECTED                  
Edit-Blank-Reverse Blank All                  Ctrl+Shift+B         UG_EDIT_REVERSE_BLANK_ALL
Edit-Blank-Unblank Selected...                Ctrl+Shift+K         UG_EDIT_UNBLANK_SELECTED
Edit-Blank-Unblank All of Part                Ctrl+Shift+U         UG_EDIT_UNBLANK_ALL_OF_PART
Edit-Transform...                             Ctrl+T               UG_EDIT_TRANSFORM                        
Edit-Object Display...                        Ctrl+J               UG_EDIT_OBJECT_DISPLAY                  
View-Operation-Zoom...                        Ctrl+Shift+Z         UG_VIEW_ZOOM                            
View-Operation-Rotate...                      Ctrl+R               UG_VIEW_ROTATE                          
View-Operation-Section...                     Ctrl+H               UG_VIEW_SECTIONING                      
View-Layout-New...                             Ctrl+Shift+N         UG_LAYOUT_NEW                           
View-Layout-Open...                           Ctrl+Shift+O         UG_LAYOUT_OPEN                          
View-Layout-Fit All Views                     Ctrl+Shift+F         UG_LAYOUT_FIT_ALL_VIEWS                 
View-Visualization-High Quality Image Ctrl+Shift+H         UG_VIEW_HIGH_QUALITY_IMAGE
View-Information  Window                                       F4   UG_VIEW_INFO_WINDOW
View-Current Dialog                          F3                   UG_VIEW_CURRENT_DIALOG
View-Reset Orientation                        Ctrl+F8              UG_VIEW_RESET_ORIENTATION
Format-Layer Settings...                       Ctrl+L               UG_LAYER_SETTINGS                       
Format-Visible in View...                     Ctrl+Shift+V         UG_LAYER_VIEW                           
Format-WCS-Display                                               UG_WCS_DISPLAY                          
File-New...                                   Ctrl+N               UG_FILE_NEW                             
File-Open...                                  Ctrl+O               UG_FILE_OPEN                             
File-Save                                     Ctrl+S               UG_FILE_SAVE_PART                       
File-Save As...                               Ctrl+Shift+A         UG_FILE_SAVE_AS                         
File-Plot...                                  Ctrl+P               UG_FILE_PLOT                            
File-Execute-Grip...                         Ctrl+G               UG_FILE_RUN_GRIP                        
File-Execute-Debug Grip...                     Ctrl+Shift+G         UG_FILE_RUN_GRIP_DEBUG                  
File-Execute-NX Open...                       Ctrl+U               UG_FILE_RUN_UFUN                        
Tools-Expression...                           Ctrl+E               UG_INSERT_DLEXPRESSION                  
Tools-Journal-Play...                         Alt+F8               UG_JOURNAL_PLAY                         
Tools-Journal-Edit                            Alt+F11              UG_JOURNAL_EDIT                          
Tools-Macro-Start Record...                   Ctrl+Shift+R         UG_MACRO_RECORD                         
Tools-Macro-Playback...                       Ctrl+Shift+P         UG_MACRO_PLAYBACK                       
Tools-Macro-Step...                            Ctrl+Shift+S         UG_MACRO_STEP                           
Preferences-Object...                         Ctrl+Shift+J         UG_PREFERENCES_OBJECT                   
Preferences-Selection...                      Ctrl+Shift+T         UG_PREFERENCES_SELECTION                
Information-Object...                         Ctrl+I               UG_INFO_OBJECT                          
Analysis-Curve-Refresh Curvature Graphs Ctrl+Shift+C         UG_INFO_MB_SHOW_GRAPHS                  
Application-Modeling...                       Ctrl+M               UG_APP_MODELING                         
Application-Shape Studio...                   Ctrl+Alt+S           UG_APP_STUDIO                           
Application-Drafting...                       Ctrl+Shift+D         UG_APP_DRAFTING                         
Application-Manufacturing...                   Ctrl+Alt+M           UG_APP_MANUFACTURING                    
Application-Sheet Metal-NX Sheet Metal Ctrl+Alt+N           UG_APP_SBSM                             
Application-Gateway...                        Ctrl+W               UG_APP_GATEWAY                          
Help-On Context...                           F1                   UG_HELP_ON_CONTEXT    
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, April 6, 2012

Unigraphics NX 7.5 Tutorials Modeling - Intersection Curve



Using  Unigraphics NX 7.5 Modeling:-
After making your selection, copy and paste the embed code above. The code changes based on your selection.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Unigraphics NX 7.5 Tutorials - Modeling - Snip and Fill Hole



Using Unigraphics NX 7.5 :-
Learn to Snip a facet body and patch a hole by Fill Hole command

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, April 5, 2012

For NX6 Users: An Accompaniment to the Tutorial "NX5 for Engineering Design

If you are using NX 6 version and with this NX 5 For An Accompaniment to the Tutorial "NX5 for Engineering Design, you may want this information up-dated for NX 6 users, here are the detail information link in pdf

Because Unigraphics NX 6 version lots of changes against the older NX 5.

Hope you enjoy this tutorials.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, April 4, 2012

Unigraphics NX 7 Manual For Engineering Design , Tutorials Free Download.

Up-dated version Tutorial for NX 7 For Engineering Design manual download . (Many Thanks to Ming C. Leu from Missouri of Science & technology ) It the same as version NX 5 for Engineering Design but using Version NX 7. From NX version 5 to 7, there are alot of difference. many new tools or features are added in to version 6 and 7.
The same models files are used in the earlier version 5. Here is the link of the models in zip files  .
It also step-by-step NX 7 tutorials, self assessment.

By the way NX manual or tutorials are expensive books, here you can get it free download.

  
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, April 3, 2012

Unigraphig NX 5 For Engineering Design Manual Download. (FREE )

Free NX manual are hard to find, like to share this free NX 5 For Engineering Design by Ming C. Leu (Thanks You Leu) I suppose some of you may heard of him.
This is a neat manual, can be used for beginners learning how to use Unigraphics NX software.
The NX 5 manual consist of tutorials, hands on tutorial in fact. Here are the files or model related to the NX 5 For Engineering Design Manual. It a step-by-step. It a zip file contain all the training models when using this manual.

PS: The above link just right click and save link as to you PC. ( virus and spyware Free )

Enjoy..
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, April 2, 2012

NX 7.5 Tutorial - Sheet Metal - Break Corner & Jog



NX 7.5 Tutorials: - 
Learn to create a sheet metal part by using Break Corner & Jog command.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, April 1, 2012

NX 7.5 Tutorials Sheet Metal - Bend Taper & Contour Flange



NX 7.5 Tutorials :-
Learn to create a sheet metal part by using Bend Taper & Contour Flange command
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, March 30, 2012

NX 7.5 Tutorials Sheet Metal - Flat Solid



Learn to flat a solid feature by using Flat Solid command, NX Sheet Metal
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, March 29, 2012

NX 7.5 Tutorial Modeling - Concept Design - Optical Mouse



Using NX 7.5 Modeling a product optical mouse. 
Learn to design a product with an ease, minimal effort and surface quality.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, March 27, 2012

How to create non parametric curves in NX 7.5 Tutorials



NX 7.5 Modeling Tutorials - Using Basic Curve, Some times I find it a pain using Basic Curve, Watching this tutorial using Basic Curve make life easier when you know how to control it. Before that I was using Sketches line tool.

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, March 26, 2012

Sunday, March 25, 2012

NX 7.5 Modeling Tutorials - Emboss on Metal Sheet



 NX 7.5  Modeling Tutorials,  Learn to emboss a text by using Emboss Sheet command.
Another cool way emboss a curve on metal sheet.
These are the tips and trick you can learn form.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, March 24, 2012

NX 7.5 Modeling Tutorial - Emboss Sheet



 Using NX 7.5 emboss text on your model, cool way of doing it.
And it easy too.

Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, March 23, 2012

NX 7.5 Modeling Tutorial - Helix and Tube



 NX 7.5 Modeling Tutorial, How to create spring using helix and tube tool.
It easy, try it. Older version of NX like 5 or 6 using the same method.


Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Tuesday, March 20, 2012

Unigraphics NX6 Tutorial Skill #1665 Human Modeling



Learn how to model  human using NX 6. Now you can add human to your model.
Able to select male or female. Move hands, fingers, legs, and so on...
 
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, March 16, 2012

Training unigraphics NX tutorial 1



Unigraphics NX tutorial, Model a knob.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

NX 6 Tutorials Tips & Tricks Metal Sheet.



This PPT NX Tutorial using Metal Sheet tools. How to  bend metal sheet to your desire.
Great tutorial .
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, March 14, 2012

NX7.5 Freeform Modeling a Camera Body.



Using NX 7.5 Freeform Modeling to create a SLR camera body.
It kind of neat.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, March 12, 2012

NX Tutorials surface modeling a Mug



How to model a Mug using Unigraphics NX Surface Modeling.

Using Studio Spline to create a Mug easily.

Credit To:
holicofdoll@naver.com
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

NX6 Tutorial Skill #1656 Vacuum Formed Geometry



NX6 Tutorial Using Sketches and other tools to easily create Vacuum Formed Geometry.

Thanks to :
www.nxtutorials.com brings you a helpful tutorial on vacuum formed geometry using NX6.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, March 11, 2012

NX6 Tutorials Skill #1657 Conic Blend



Using NX6 to easily create conic Blend.

Credit to:
www.nxtutorials.com brings you a helpful tutorial on creating a conic blend using NX6.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Saturday, March 10, 2012

Unigraphics NX6 TUTORIAL - Move Face



Unigraphics NX6 TUTORIAL  -  Move Face

Credit to:
Design Freedom Powered by Synchronous Technology is now available on computers running Mac OS.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, March 9, 2012

NX5 Tutorial 3 - Datums and Mirroring



Create Holes on block via Datum and Mirroring

Credit to:
http://www.manufacturinget.com/
Video to accompany class lecture. Using Datum plane to simplify positioning. Mirror feature and creating threads.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, March 8, 2012

NX6 TUTORIAL - Move Face problem solved using Split Body



NX6 or Unigraphic NX6 tutorial, how to solved move face problem when using split body.

Credit to : www.nxtutorials.com
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Wednesday, March 7, 2012

Unigraphics Tutorials: Shortcut keys

Below a list of  Unigraphics NX Shortcut keys to help when doing modeling and drafting.  Make you work easier and faster. I like using shortcut keys.


UNIGRAPHICS SHORTCUT

KEY;  Function
Ctrl-B; Edit, Blank
Ctrl-C; Copy
Ctrl-D; Delete
Ctrl-E; Tools, Expression
Ctrl-F; Fit View
Ctrl-G; Grip Execute
Ctrl-I; Information, Object
Ctrl-J; Edit, Object Display
Ctrl-L; Format, Layer Settings
Ctrl-M; Application, Modeling
Ctrl-N; File, New
Ctrl-O; File, Open
Ctrl-P; File, Plot
Ctrl-R; View, Operation, Rotate
Ctrl-S; File, Save
Ctrl-T; Edit, Transform
Ctrl-U; Execute User Function
Ctrl-V; Paste
Ctrl-W; Application, Gateway
Ctrl-X; Cut
Ctrl-Z; Edit, Undo
Ctrl-Shift-A ; File, Save As
Ctrl-Shift-B ; Edit, Blank, Reverse Blank All
Ctrl-Shift-O ; Format, Layout, Open
Ctrl-Shift-C ; View, Curvature Graph
Ctrl-Shift-D ; Drafting
Ctrl-Shift-F ; Format, Layout, Fit All Views
Ctrl-Shift-S ; Tools, Macro, Step
Ctrl-Shift-G ; Debug Grip
Ctrl-Shift-H ; High Quality Image Part
Ctrl-Shift-I ; Information, Object
Ctrl-Shift-J ; Preferences, Object
Ctrl-Shift-K ; Edit, Blank, Unblank Selected
Ctrl-Shift-N ; Format, Layout, New
Ctrl-Shift-P ; Tools, Macro, Playback
Ctrl-Shift-Q ; Quick Shaded Image
Ctrl-Shift-R ; Tools, Macro, Record
Ctrl-Shift-T ; Preferences, Selection
Ctrl-Shift-U ; Edit, Blank, Unblank All Of
Ctrl-Shift-V ; Format, Visible In View
Ctrl-Shift-Z ; View, Operation, Zoom
Ctrl-Alt-B ; Tools, Boundary
Ctrl-Alt-C ; Tools, CLSF
Ctrl-Alt-M ; Application Manufacturing
Ctrl-Alt-N ; Tools, Unisim
Ctrl-Alt-W ; Application Assemblies
Ctrl-Alt-X ; Tools, Lathe Cross-Section
Alt-Tab ; Toggles Application
Alt-F4 ; Closes Active Window
F1 ; Help on Context
F3 ; View Current Dialog
F4 ; Information Window
F5 ; Refresh
F8; Closest Orthographic View
Home; Trimetric View
End; Isometric View

In Drafting when you are dimensioning a part.

Right arrow; text to the right of dim
Left arrow; text to the left of dim
Up arrow; text above dim
Down arrow; text below arrow Numbers on key pad; Trailing Zeros
E; goes strait to annotation editor
S; goes to dimension style
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, March 4, 2012

Unigraphics Tutorials: Tutorial 15: Assemblies



Learn how to used Assemblies  in Unigraphics NX 4.
ug, nx or  ugx is the same.

Credit To:
All these video tutorials were written and created by Kim Manner, Katie Simon, and Brandon Lewis. College of Engineering, University of Wisconsin -Madison. They Contain a perfect and full explanations for the modeling and assembling with Unigraphics NX4.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Friday, March 2, 2012

Unigraphics Tutorials: Tutorial 14: Surfaces



Learn how to used Surfaces in Unigraphics NX 4.
ug, nx or  ugx is the same.

Credit To:
All these video tutorials were written and created by Kim Manner, Katie Simon, and Brandon Lewis. College of Engineering, University of Wisconsin -Madison. They Contain a perfect and full explanations for the modeling and assembling with Unigraphics NX4.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Thursday, March 1, 2012

Unigraphics Tutorials: Tutorial 13: Positioning Features - Holes



Learn how to used Positioning Features - Holes  in Unigraphics NX 4.
ug, nx or  ugx is the same.

Credit To:
All these video tutorials were written and created by Kim Manner, Katie Simon, and Brandon Lewis. College of Engineering, University of Wisconsin -Madison. They Contain a perfect and full explanations for the modeling and assembling with Unigraphics NX4.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Monday, February 27, 2012

Unigraphics Tutorials: Tutorial 12: Features



Learn how to used Features  in Unigraphics NX 4.
ug, nx or  ugx is the same.

Credit To:
All these video tutorials were written and created by Kim Manner, Katie Simon, and Brandon Lewis. College of Engineering, University of Wisconsin -Madison. They Contain a perfect and full explanations for the modeling and assembling with Unigraphics NX4.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed

Sunday, February 26, 2012

Unigraphics Tutorials: Tutorial 11: Spline Editing



Learn how to used Spline Editing  in Unigraphics NX 4.
ug, nx or  ugx is the same.

Credit To:
All these video tutorials were written and created by Kim Manner, Katie Simon, and Brandon Lewis. College of Engineering, University of Wisconsin -Madison. They Contain a perfect and full explanations for the modeling and assembling with Unigraphics NX4.
Stumble
Delicious
Technorati
Twitter
Facebook
Yahoo
Reddit
Feed